![background image](http://html1.mh-extra.com/html/omron/r88d-kn-series/r88d-kn-series_user-manual_742799495.webp)
A-95
Appendicies
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
A
-3 Sysm
ac Err
o
r Sta
tus
Cod
es
App
A-3
-1 Error T
ab
le
04AD0000 hex
IPM Error
The current flowing
through the
converter exceeded
the specified value.
•
A short-circuit, line-to-ground
fault, contact failure, or
insulation failure occurred on
the U, V, or W motor line.
•
The Servo Drive failed.
•
The relay for the dynamic brake
has been welded due to
frequent Servo ON/OFF
operations.
•
Motor windings are burned out.
•
The motor is not suitable for the
Servo Drive.
•
The pulse input timing is the
same as or earlier than the
Servo ON timing.
04AE0000 hex
Regeneration
transistor
Error
The Servo Drive
regeneration drive
transistor is faulty.
•
The Servo Drive regeneration
drive transistor is faulty.
04B10000 hex
Node
Address
Setting Error
The node address
that was read from
the rotary switches
was not between 00
and 99.
•
The Servo Drive failed.
04B20000 hex
Other Errors
The Servo Drive
malfunctioned, or
an error occurred in
the Servo Drive.
•
The control circuit
malfunctioned temporarily due
to excess noise.
•
The self-diagnosis function of
the Servo Drive detected an
error in the Servo Drive.
080B0000 hex
Safety Input
Error
One of the input
photocouplers for
safety inputs 1 and
2 turned OFF.
•
The cable is disconnected or
broken.
080C0000 hex
External
Encoder
Connection
Error
A disconnection
was detected
because
communications
between the
external encoder
and the Servo Drive
were stopped more
frequently than the
specified value.
•
The wiring is incorrect.
080D0000 hex
External
Encoder
Communicati
ons Data
Error
There was a
communications
error in data from
the external
encoder.
•
There is insufficient external
encoder power supply voltage.
•
Noise
080E0000 hex
External
Encoder
Status Error
0
Bit 00 of the
external encoder
error code (ALMC)
was set to 1.
•
Bit 00 of the external scale error
code (ALMC) was set to 1.
080F0000 hex
External
Encoder
Status Error
1
Bit 01 of the
external encoder
error code (ALMC)
was set to 1.
•
Bit 01 of the external encoder
error code (ALMC) was set to 1.
08100000 hex
External
Encoder
Status Error
2
Bit 02 of the
external encoder
error code (ALMC)
was set to 1.
•
Bit 02 of the external encoder
error code (ALMC) was set to 1.
Event code
Event name
Meaning
Assumed cause
Level
Reference
Maj
Prt
Min
Obs
Info