![background image](http://html1.mh-extra.com/html/omron/r88d-kn-series/r88d-kn-series_user-manual_742799335.webp)
10-13
10 Operation
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
10-3 T
rial
Op
eratio
n
10
1
0-3-2
T
est Oper
ation via USB Co
mm
unication
s from the CX-Dr
iv
e
1
Use the Connector CN1.
2
Supply 12 to 24 VDC to the control signal connector pins +24 VIN and COM.
3
Turn ON the Servo Drive power.
4
Connect a USB cable to the USB connector (CN7).
5
Start the CX-Drive and go online with the Servo Drive via USB communications.
6
Select
Test Run
from the
Tuning
Menu of the CX-Drive.
7
Select
Servo ON
to servo-lock the Linear Motor.
8
Select
Positive or Negative
and move the Linear Motor.
The Linear Motor will move until
Stop
is selected.
Precautions for Correct Use
Precautions for Correct Use
The test operation function via USB communications from the CX-Drive cannot be used while
EtherCAT communications are established.
10-3-2 Test Operation via USB Communications from the CX-Drive