![background image](http://html1.mh-extra.com/html/omron/r88d-kn-series/r88d-kn-series_user-manual_742799522.webp)
Appendicies
A-122
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
Event name
Object Corrupted
Event code
14AD0000 hex
Meaning
The checksum data in non-volatile memory is corrupted.
Source
EtherCAT Master Function Module
Source details
Slave
Detection
timing
When
establishing
communications
after turning ON
power to the
slave
Error attributes
Level
Minor fault
Recovery
Error reset (after
cycling slave
power)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
---
---
---
System-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Remedy
Prevention
Non-volatile memory failure
Replace the Servo Drive.
None
Attached
information
None
Precautions/
Remarks
“
37
”
is displayed on the Servo Drive front panel and F237 is given as the AlarmCode (4001 hex).
Event name
Motor Setting Error
Event code
28010000 hex
Meaning
Settings associated with the motor and external encoder are missing.
Source
EtherCAT Master Function Module
Source details
Slave
Detection
timing
Continuously
Error attributes
Level
Minor fault
Recovery
Error reset (after
cycling slave
power)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
---
---
---
System-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Remedy
Prevention
Settings associated with the motor
and external encoder are missing.
Check the specifications of the motor
and external encoder and provide the
required settings.
Check the specifications of the motor
and external encoder and provide the
required settings.
Attached
information
None
Precautions/
Remarks
“
50
”
is displayed on the Servo Drive front panel and F060 is given as the AlarmCode (4001 hex).