Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 96 / 578

3-20
Issue 1.0 March 2001
365-575-389
Installation Manual
Equipment Installation
Cabinet Installation (Continued)
Uncrating and
Moving the
Cabinet
(continued) Tools and/or Equipment required
Listed in the table below are tools needed for uncrating and moving the cabinet
into position:
!
CAUTION:
Verify that all lifting and/or transporting devices meet the local codes and
regulations and that installation personnel have been trained in their use.
Uncrating the Bay
Listed below are the steps used to uncrate the bay:
(Continued on next page)
Tool/Equipment Purpose
Pinch-bar Uncrating the cabinet
Claw-type Hammer Uncrating the cabinet
Lifting and/or
transporting device Moving the cabinet into position
Step Action
1 Using a pinch-bar and claw type hammer in areas that have been nailed,
uncrate the bay in its shipping position. The bottom plate where the bay
rests may remain until the equipment bay is at its final position.
2 Remove the plastic bag and all foreign materials.
3 Remove any guard rail covers from the base of the bay and set aside.