Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 300 / 578

6-72
Issue 1.0 March 2001
365-575-389
Installation Manual
WaveStar OLS 40G Fiber and Circuit Pack Installation
Two OA/Two OA Dual Facing Shelf
Installation (Continued)
Fiber Jumper
Installation
(continued) Table 6-26. Outside Plant LGX Fiber Jumpers for Two OA Dual Facing Shelf
Customer Maintenance Fiber Jumper Installation
If equipped, install the fiber jumpers from the WaveStar OLS 40G to any equipped
customer maintenance facility or LGX by adding the labels then routing the fibers
by referring to Figure 6-14 and Table 6-27.
Table 6-27. Customer Maintenance Fiber Jumpers for Two OA Dual Facing
Shelf
Fiber Protection If fiber duct is not installed, use the split polyethylene fiber protection tubing
supplied in the Installation Kit C848065959 to protect the fibers that run down
through the sides of the cabinet. Refer to Figure 6-2 and Figure 6-14.
Application Line
Connect
Point
Circuit
Pack Connector
Label to
Install
Two OA Dual Facing
Shelf
Refer to Figure 6-14
for connection point
1 1 OA-1A IN 1A-OA-IN
2 OA-1B OUT 1B-OA-OUT
2 3 2A-OA OUT 2A-OA-OUT
4 2B-OA IN 2B-OA-IN
Application Line
Connect
Point
Circuit
Pack Connector Label to Install
Two OA Dual
Facing Shelf
Refer to Figure 6-14
for connection point
1 A TLM 1A CM IN 1A-TLM-CMIN
B TLM 1A CM OUT 1A-TLM-CMOUT
2 C TLM 2A CM IN 2A-TLM-CMIN
D TLM 2A CM OUT 2A-TLM-CMOUT