Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 494 / 578

12-22
Issue 1.0 March 2001
365-575-389
Installation Manual
Troubleshooting
Troubleshooting Information
(Continued)
CMC Connection
Requirements
(continued) Figure 12-1. CIT (CMC) Minimum Connections
Test-Auto-Turnup
— Local
Description
The Auto Turnup-Local test is an automated test which verifies an Optical Line
System (OLS) has been installed properly. The test detects cabling errors that
might otherwise not be detected until customer traffic is placed on the system.
The "FAULT.Test.Auto Turnup.Local" test verifies continuity through one of two
possible paths emanating from Telemetry packs within a WaveStar OLS 40G End
Terminal or Repeater Bay:
■
The Telemetry Pack-to-Optical Amplifier Pack (Supervisory) Channel, or
■
The Customer Maintenance Signal (CMS) In/Out Port.
(Continued on next page)
TD
RD
DTR or RTS
CTS
DSR
2
3
20 or 4
5
6
PC
DTE
OLS
DCE Port
DSR (6) hi
DTR (20) lo
CD (8) hi
CTS (5) hi
RTS (4) lo
TD
RD
DTR or RTS
CTS
DSR
2
3
20 or 4
5
6
PC
DTE
OLS
DTE Port
DSR (6) lo
DTR (20) hi
CD (8) lo
CTS (5) lo
RTS (4) lo
2
3
2
3