Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 540 / 578

D-10
Issue 1.0 March 2001
365-575-389
Installation Manual
CMC Dantel Alarm and Control Block Installation,
Extended Miscellaneous Discretes
Provisioning Extended Miscellaneous
Discretes
Enabling SER
TLM 1 Port
The SER TLM Port must first be enabled through the CMC by using the following
Command:
■
SECURITY-ENTER-Channel Identifier-Security, AID=SER_TLM1, PORT
ACC=enable
Extended
Miscellaneous
Discrete
Assignments The Miscellaneous Discrete Assignments are provisioned by using the following
command through the CMC:
CONFIGURATION_Set_Attribute_Enviroment_
This input sets the Descriptions and Alarm Levels for the miscellaneous discrete
inputs.
■
The Point parameter selects the miscellaneous discrete input point to
provision
NOTE:
The miscellaneous discrete points 1-16 are assigned to the original
miscellaneous discrete ports. Therefore the extended miscellaneous
discretes will begin their assignment with point number 17 and continue
through point number 144.
■
The Alarm Level Parameter provisions the severity of the condition
associated with the closing of the selected miscellaneous discrete input
point. The choices are:
— "CR": critical
— "MJ": major
— "MN": minor
— "NA": status not alarmed
— "NR": status not alarmed and not reported to the OS.
The Description parameter is the text string associated with the selected
miscellaneous discrete environmental input point. It is character string of up to 26
characters, where the characters are letters, digits, or spaces. It is used to identify
the point in the FAULT-RETREIVE-LOG and FAULT-RETREIVE-ALARMS
reports.