Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 175 / 578

Issue 1.0 March 2001
5-19
365-575-389
Installation Manual Wired Cable Installation
Serial, Parallel, and X.25 Telemetry
Cable Installation (Continued)
X.25 (TL-1)
Telemetry Cable
Installation
(continued) Table 5-10. X.25 Telemetry Cable Connection (continued)
X.25 Telemetry Cable Installation Procedure
Perform the following steps to install X.25 telemetry cable.
NOTE:
WaveStar OLS 40G, Group 602 and 652 Cables have a socket (female-
type connector with a blank label) at one end and a plug (male-type
connector labeled P156A) at the other end. The cable plug end (male)
mates with the socket (J18) on the OLS. The socket end (female) is
intended to mate with the X.25 network equipment. For cables that have
two blank labels, mark P18 on the blank label at the plug (male) end of the
cable.
(Continued on next page)
Name Designation
P156A
Terminal
Wire
Color
Datakit
End
MSR Receiver Signal
Element Timing MSRRSET 17 R/G 17 RSET
No Connection None 18 None
No Connection None 19 None
MSR Data Terminal
Ready MSRDTR
MSRCTS 20
5
W/S
W/G
20 DTR
4 RTS
**
No Connection None 21 None
MSR Ring Indicator MSRRI 22 R/BL 22 RRI
No Connection None 23 None
No Connection None 24 None
No Connection None 25 None