Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 28 / 578

xxviii Issue 1.0 March 2001
365-575-389
Installation Manual About This Document
How to Use This Manual (Continued)
Section
Descriptions
(continued)
(Continued on next page)
Chapter Number
and Title Description
Chapter 5, "Wired
Cable Installation" Provides information about wired cables and the
interconnect panel related to WaveStar OLS 40G. It
describes how to install the wired cables including the
Office Alarms, Serial, Parallel & X.25 Telemetry Cables,
CIT DTE Cables, Line and Section Orderwire, Section
User Channel Cables, Miscellaneous Mount Intershelf
Wiring, and Miscellaneous Discrete Cables.
Chapter 6, "WaveStar
OLS 40G Fiber and
Circuit Pack
Installation" Describes the Fiber Installation procedures for
WaveStar OLS 40G 1A-TX, 1A-RCV, Repeaters, and
Dual-Facing Shelf Applications, Single Optical Amplifier
applications, as well as Circuit Pack Placement.
Chapter 7, "Powering" Provides procedures for verifying cabinet/shelf ground
and powering the cabinet/shelf for the WaveStar OLS
40G.
Chapter 8, "Network
Element Startup and
Provisioning" Provides procedures for installing circuit packs in the
shelves, installing software and logging into the
Network Element, and for entering basic provisioning
information so that alarms will clear when all end-to-end
fiber connections are correctly made.
Chapter 9, "Local
Installation Testing" Describes how to perform WaveStar OLS 40G Auto
Turnup tests at End Terminals, Repeater, Dual-Facing
Shelves, and Dual Bay stations. These tests are
self-tests available in the Network Element Software.
Tests of cabling and Operations Systems interfaces are
also described.
Chapter 10, "Fiber
Connections" Describes how to establish the optical line system.
General information of Lightwave jumpers and optical
Line Buildouts (LBOs) for quick references is given.