Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 110 / 578

3-34
Issue 1.0 March 2001
365-575-389
Installation Manual
Equipment Installation
Cabinet Installation (Continued)
Additional
Cabinet Assembly
(Continued) Install Door Procedure
Assemble the doors as follows:
(Continued on next page)
Step Action
1 Install the OLS or OT indicator strip to the top front of the cabinet by
snapping the spring catches to the pins on the upper door frame
assembly. Part A on Figure 3-9 on page 3-35.
2 Install the OLS or OT blank indicator strip to the top rear of the cabinet by
snapping the spring catches to the pins on the upper door frame
assembly. Part A on Figure 3-10.
3 Mount the front door assemblies to the front of the cabinet by aligning the
bottom pins then pulling the top pins to engage into the upper door frame.
The right front door has the CIT access panel. Part B on Figure 3-9.
4 Mount the rear door assemblies to the rear of the cabinet by aligning the
bottom pins then pulling the top pins to engage into the upper door frame.
Part B on Figure 3-10