Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 179 / 578

Issue 1.0 March 2001
5-23
365-575-389
Installation Manual Wired Cable Installation
CIT (CMC) DTE Cables Installation
Description The WaveStar OLS 40G supplies access to remote CenterLink Management
Console (CMC) PCs through a local area network or modem connection to the
CIT-DTE port.
This connection to the Optical Translator System Shelf is not supported in any of
the WaveStar OLS 40G Releases; however, in Release 3, information may be
transferred from the OT to the OLS provided the OT Controller Option is installed.
Available CIT
(CMC) DTE
Cables Table 5-13 lists cables available for CIT (CMC) DTE applications for WaveStar
OLS 40G.
Table 5-13. WaveStar OLS 40G CIT (CMC) DTE Cable
Table 5-18 lists cables available for CIT (CMC) DTE applications.
CIT (CMC) DTE
Cable Connections
to WaveStar OLS
40G
Interconnection
Panel The CIT-DTE cable connects from J17 to a local area network or modem which
must meet the following requirements:
■
Must be able to transmit at 300, 1200, 2400, 4800, or 9600 baud.
■
Must have an RS-232 DCE interface port.
■
Must be configured for 8 bit data bytes with 1 start bit and 1 stop bit.
■
Must not use the DSR lead.
ED-7G028-22 Cable Group Cable Length (ft.)
702 As Required (150’ max.)
752 150’