Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 307 / 578

Issue 1.0 March 2001
6-79
365-575-389
Installation Manual WaveStar OLS 40G Fiber and Circuit Pack Installation
Two OA/One OA Dual Facing Shelf
Installation (Continued)
Fiber Jumper
Installation
(continued) Outside Plant LGX Fiber Jumper Installation
Install the fiber jumpers from the WaveStar OLS 40G to the outside plant LGX for
each line by adding the labels from Installation Kit C848065959 then routing the
fibers by referring to Figure 6-16 and Table 6-29.
!
CAUTION:
Do not connect either end to the fiber jumper at this time.
Table 6-29. Outside Plant LGX Fiber Jumpers for Two OA/One OA Dual
Facing Shelf
Customer Maintenance Fiber Jumper Installation
If equipped, install the fiber jumpers from the WaveStar OLS 40G to any equipped
customer maintenance facility or LGX by adding the labels then routing the fibers
by referring to Figure 6-16 and Table 6-30.
(Continued on next page)
Application Line
Connect
Point
Circuit
Pack Connector
Label to
Install
Two OA/One OA Dual
Facing Shelf
Refer to Figure 6-16
for connection point
1 2 1A-OA IN 1A-OA-IN
3 1B-OA OUT 1B-OA-OUT
2 1 ODU-2B IN 2B-ODU-IN
4 2B-OA OUT 2B-OA-OUT