Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 235 / 578

Issue 1.0 March 2001
6-7
365-575-389
Installation Manual WaveStar OLS 40G Fiber and Circuit Pack Installation
Generic Information for Fiber
Installation (Continued)
Available Fiber
Jumpers
Table 6-1 lists some of the available jumpers for high-speed fiber connection for
use with the WaveStar OLS 40G. For additional fiber jumpers available in the
Rack and Stack configuration, refer to the Rack and Stack subsection of this
chapter.
Table 6-1. Single-Mode Fiber Jumpers
Table 6-2 lists some of the available jumpers for Intrashelf fiber connection for use
with the WaveStar OLS 40G.
Table 6-2. Intrashelf Lightwave Jumpers
(Continued on next page)
Code Comcode Length Description
FS1EP-EP-02 107149494 2 ft. ST II+ - ST II+
FS1EP-EP-10 107149536 10 ft. ST II+ - ST II+
FS1EP-EP-25 107149569 25 ft. ST II+ - ST II+
FS1EP-EP-50 107149601 50 ft. ST II+ - ST II+
FS1EP-EP-100 107149627 100 ft. ST II+ - ST II+
LS1FC-FC-02 107243156 2 ft. FC - FC
LS1FC-FC-10 106593759 10 ft. FC - FC
LS1FC-FC-25 107243222 25 ft. FC - FC
LS1FC-FC-50 107243255 50 ft. FC - FC
LS1FC-FC-100 107243271 100 ft. FC - FC
List
Max. No.
of Chan. System Type Requirement No./Length/Type
L162 16 2 OA ET and
Repeater 1 per Optical Line 4-50"-ST to ST
3-50"-LC to ST
1-20"-LC to ST
MiniCord fiber