Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 170 / 578

5-14
Issue 1.0 March 2001
365-575-389
Installation Manual
Wired Cable Installation
Serial, Parallel, and X.25 Telemetry
Cable Installation
OLS Serial
Telemetry Cables
Installation
Serial telemetry (TBOS) provides information to the maintenance center about
that location and remote control over that location from the maintenance center. In
Releases 2.0 and 2.1 OLS, the Ser Tlm 1 port will support the Extended
Miscellaneous Discretes feature. This involves connecting the Ser Tlm 1 port to
an Extended Miscellaneous Unit (EMDU) located outside of the OLS system.
Appendix D and Appendix E covers the installation of the EMDU to the OLS
system. In Release 3.0, the OT and OLS can be integrated as a single network
element and the EMDU is no longer necessary to monitor the OT CP Fail and
LOS alarms. However, the EMDU may still be used to monitor other
Miscellaneous Discrete alarm points to provide an additional means of notifying
an operations system (OS) maintenance center of environmental conditions at the
OLS site.
Releases 1.0, 2.0, 2.1, and 3.0 do not support use of the Ser Tlm 2 port (P20).
Available WaveStar OLS 40G Serial Telemetry Cables
Table 5-4 lists available cables for serial telemetry applications
Table 5-4. WaveStar OLS 40G Serial Telemetry Cables
Table 5-5 lists serial telemetry cable connection to the interconnection panel.
(Continued on next page)
ED-7G028-22
Cable Group
Cable Length (ft.)
201 As required(4000’ max.)
251 150
261 250