Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 268 / 578

6-40
Issue 1.0 March 2001
365-575-389
Installation Manual
WaveStar OLS 40G Fiber and Circuit Pack Installation
Repeater Installation (Continued)
Circuit Pack Equip
Procedure for 2-
Line Systems
(continued)
Fiber Jumper
Installation Intrashelf Fiber Jumper Installation
Install the 4-fiber jumpers (50 inches long) per List 161 for each line by adding the
labels then routing the fibers by referring to Figure 6-7 and Table 6-14.The fibers
must pass in front of the shelf bracket to the right of the TLM slots. The fibers
should be dressed behind the shelf mounting brackets.
(Continued on next page)
Step Action
4 Install, but do not seat, the following transmission circuit packs for line 1
in the lower shelf:
■
(2) LEA7, LEA7B, or LEA104 OA
■
(2) LDA1 TLM
5 If line 2 is equipped, install, but do not seat, the following transmission
circuit packs for line 2 in the lower shelf:
■
(2) LEA7, LEA7B, or LEA104 OA
■
(2) LDA1 TLM
6 Repeat Steps 1 to 5 if an additional OLS repeater shelf is to be equipped
in the same bay.