Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 480 / 578

11-8
Issue 1.0 March 2001
365-575-389
Installation Manual
Connecting SONET/SDH Systems to WaveStar OLS
40G
Connect SONET/SDH to Optical Line
System (OLS) (Continued)
Connect
Compatible
SONET/SDH
Transmitter to OLS
Table 11-1. OLS-Compatible OC-48/STM-16 Transmitter Output Levels
(Continued on next page)
Step Action
1 At transmitter or OTU/OTPM, verify proper LBO is installed on the output
jack as listed on the faceplate label.
2 At transmitter or OTU/OTPM, clean then connect assigned fiber jumper
to OUT jack. This connector should have a pre-selected LBO from the
factory, with a label designating its value. Verify the LBO in the OUT port
is the value indicated on the label.
3 At the WaveStar OLS 40G, clean then connect fiber jumper from the
transmitter or OTU/OTPM to an optical power meter.
Requirement: Refer to Table 11-1 for OC-48/STM-16 or Table 11-2 for
other signals.
FT-2000 ADR
Transmitters
FT-2000 LCT
Transmitters 41-Type OTU
Output Connector
Power Level
739E1/739G1 739D1/739F1 Wavelength 1 -5.0 to -3.0 dBm
739E2/739G2 739D2/739F2 Wavelength 2 -6.3 to -4.3 dBm
739E3/739G3 739D3/739F3 Wavelength 3 -7.5 to -5.5 dBm
739E4/739G4 739D4/739F4 Wavelength 4 -8.2 to -6.2 dBm
739E5/739G5 739D5/739F5 Wavelength 5 -8.7 to -6.7 dBm
739E6/739G6 739D6/739F6 Wavelength 6 -9.2 to -7.2 dBm
739E7/739G7 739D7/739F7 Wavelength 7 -9.0 to -7.0 dBm
739E8/739G8 739D8/739F8 Wavelength 8 -7.5 to -5.5 dBm
739E9/739G9 739D9/739F9 Wavelength 9 -1.0 to -3.0 dBm
739E10/739G10 739D10/739F10 Wavelength 10 -3.6 to -5.6 dBm