Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 284 / 578

6-56
Issue 1.0 March 2001
365-575-389
Installation Manual
WaveStar OLS 40G Fiber and Circuit Pack Installation
One OA 1A-RCV End Terminal
Installation (Continued)
Circuit Pack Equip
Procedure for 2-
Line Systems
(continued)
Step Action
3 Install, but do not seat, the following controller circuit packs in the lower
shelf:
■
(1) LEA1 SYSCTL
■
(1) LEA2 SYSMEM
■
(1) LEA5 TOHCTL
4 Install, but do not seat, the following transmission circuit packs and units
for line 1 in the OLS shelf:
■
(1) LEA105, LEA7, or LEA7B OA in the 1A slot
■
(1) LDA1 TLM
■
(1) LDA1 TLM if R3.0 and later Telemetry Feed-Through is being
installed
■
(1) 506A or 506B OMU in the 1B slot (Leave the retainer screws
for the unit on the shelf at this time.)
■
(1) 606B or 606D ODU in the 1A slot (Leave the retainer screws
for the unit on the shelf at this time.)
5 If line 2 is equipped, install, but do not seat, the following transmission
circuit packs and units for line 2 in the OLS shelf:
■
(1) LEA105, LEA7, or LEA7B OA in the 2A slot
■
(1) LDA1 TLM
■
(1) LDA1 TLM if R3.0 and later Telemetry Feed-Through is being
installed
■
(1) 506A or 506B OMU in the 2B slot (Leave the retainer screws
for the unit on the shelf at this time.)
■
(1) 606B or 606D ODU in the 2A slot (Leave the retainer screws
for the unit on the shelf at this time.)
6 Repeat Steps 1 to 5 if an additional OLS shelf is to be equipped in the
same bay or cabinet.