Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 425 / 578

Issue 1.0 March 2001
9-35
365-575-389
Installation Manual Local Installation Testing
Installing OTU/QOTU/OTPMs into
Final Positions
Basic Instructions
The installation instructions will specify the location of each OTU/QOTU/OTPM
circuit pack.
Following the precautions previously listed at the beginning of this section, install
and seat all OTU/OTPM circuit packs into their final positions.
Provisioning of
Miscellaneous
Discretes The miscellaneous discretes alarms (environmental alarms with an assigned
number) will be assigned appropriate descriptions. Environmental alarms 17
through 48 will be CP FAIL OTU #. Environmental Alarms 49 through 80 will be
identified as LOS OTU “N” where “N” is the associated OTU slot number. Only
slots with OTUs in them need to be provisioned. Refer to Table 9-3 on page 9-31
to obtain the alarms associated with each OTU slot and its function.
In addition to the OTU miscellaneous discrete alarms, each shelf has two alarms
to indicate an A or B power failure for a total of 6 alarms. The power fail alarms are
environmental alarms 81 through 86. They are listed in Table 9-4. on page 9-35
along with their descriptions for provisioning.
Table 9-4. Power Fail Miscellaneous Discrete Alarms
Environmental
Alarm No.
Alarm Description Provisioned Description
81 A Power Fail - System Shelf A PWR FAIL SYS
82 B Power Fail - System Shelf B PWR FAIL SYS
83 A Power Fail - Complementary
Shelf 1 A PWR FAIL CMP 1
84 B Power Fail - Complementary
Shelf 1 B PWR FAIL CMP 1
85 A Power Fail - Complementary
Shelf 2 A PWR FAIL CMP 2
86 B Power Fail - Complementary
Shelf 2 B PWR FAIL CMP 2