Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 460 / 578

10-24
Issue 1.0 March 2001
365-575-389
Installation Manual
Fiber Connections
AGNE Office Transmit OA Connection
(Continued)
Line 1 Connection
Procedures
(continued)
Line 2 Connection
Procedures Follow the procedures in the table below to make Line 2 Connections:
(Continued on next page)
Step Action Reference
3 Verify the OA Output Power by referring to the table. Table 10-4 on
page 10-11
4 For 7-8 span applications, install a 3 dB LBO in the 1B
OA OUT. Clean and then connect the fiber jumper to 1B
OA OUT and the outside plant fiber at the LGX. Use Test
point 1P. Figure 10-5
on page
10-25
Step Action Reference
1 Clean and then connect 2B OA OUT to an optical power
meter. Use Test point 1S. Figure 10-5
on page
10-25
2 Verify the OA Output Power by referring to the table. Table 10-4 on
page 10-11
3 For 7-8 span applications, install a 3 dB LBO in 2B OA
OUT. Clean and then connect the fiber jumper to 2B OA
OUT and the outside plant fiber at the LGX. Use Test
point 1S. Figure 10-5
on page
10-25
4 Execute the CONFIGURATION.Retreive.Optical_Line
command and record the Channel Loading Factor for
use in downstream offices.