Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 314 / 578

6-86
Issue 1.0 March 2001
365-575-389
Installation Manual
WaveStar OLS 40G Fiber and Circuit Pack Installation
One OA/Two OA Dual Facing Shelf
Installation (Continued)
Fiber Jumper
Installation
(continued) Outside Plant LBX Fiber Jumper Installation
Install the fiber jumpers from the WaveStar OLS 40G to the outside plant LGX for
each line by adding the labels from Installation Kit C848065959 then routing the
fibers by referring to Figure 6-18 and Table 6-32.
!
CAUTION:
Do not connect either end to the fiber jumper at this time.
Table 6-32. Outside Plant LGX Fiber Jumpers for One OA/Two OA Dual
Facing Shelf
Customer Maintenance Fiber Jumper Installation
If equipped, install the fiber jumpers from the WaveStar OLS 40G to any equipped
customer maintenance facility or LGX by adding the labels from Installation Kit
C848065959 then routing the fibers by referring to Figure 6-18 and Table 6-33.
(Continued on next page)
Application Line
Connect
Point
Circuit
Pack Connector
Label to
Install
One OA/Two OA Dual
Facing Shelf
Refer to Figure 6-18
for connection point
1 1 ODU-1 IN 1A-ODU-IN
2 1A-OA OUT 1A-OA-OUT
2 3 2A-OA OUT 2A-OA-OUT
4 2B-OA IN 2B-OA-IN