Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 442 / 578

10-6
Issue 1.0 March 2001
365-575-389
Installation Manual
Fiber Connections
Overview (Continued)
Description of
Procedures
This section contains procedures to start at the WaveStar OLS 40G DS-NE
(assumed to be the 1A Transmit) office and connect sites sequentially to the
AGNE (assumed to be the 1A Receive) office. The following procedures are
included in this section:
n
DS-NE Office Transmit OA Connection Procedure
n
Repeater A Direction Connection Procedure
n
AGNE Office Receive OA Connection Procedure
n
AGNE Office Transmit OA Connection Procedure
n Repeater B Direction Connection Procedure
n DS-NE Office Receive OA Connection Procedure
Sequence of
Operations
Operations in this section start at the DS-NE site (1A Transmit) and proceed in the
A direction to the other end terminal (AGNE/1A Receive) as shown in Figure 10-1
on page 10-6.
Once the installation team reaches the AGNE site again they will proceed back in
the B direction to the DS-NE site.
Figure 10-1. System Turnup Sequence of Example System
OLS AB3
Repeater
OLS AB4
1A Receive
OLS AB1
1A Transmit
OLS AB2
Repeater
4 3
5 2
6 1
DS-NE
AGNE
NOTE:
OLSAB1 to OLSAB4
are example TIDS
START
FINISH