Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 271 / 578

Issue 1.0 March 2001
6-43
365-575-389
Installation Manual WaveStar OLS 40G Fiber and Circuit Pack Installation
Repeater Installation (Continued)
Fiber Jumper
Installation
(continued) Outside Plant LGX Fiber Jumper Installation
Install the fiber jumpers from the WaveStar OLS 40G to the outside plant LGX for
each line by adding the labels from the Installation Kit C848065959 then routing
the fibers by referring to Figure 6-8 and Table 6-15.
!
CAUTION:
Do not connect either end to the fiber jumper at this time.
Table 6-15. Outside Plant LGX Fiber Jumpers for Repeaters
Customer Maintenance Fiber Jumper Installation
If equipped, install the fiber jumpers from the WaveStar OLS 40G to any equipped
customer maintenance facilities or LGX by adding the labels from the Installation
Kit C848065959 then routing the fibers. Refer to Figure 6-8 and Table 6-16.
(Continued on next page)
Application Line
Connect
Point
Circuit
Pack Connector Label to Install
Repeater
Refer to
Figure 6-8 for
connection points
1 1 OA 1A OUT 1A-OA-OUT
2 OA 1A IN 1A-OA-IN
3 OA 1B OUT 1B-OA-OUT
4 OA 1B IN 1B-OA-IN
2 5 OA 2A OUT 2A-OA-OUT
6 OA 2A IN 2A-OA-IN
7 OA 2B OUT 2B-OA-OUT
8 OA 2B IN 2B-OA-IN