Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 86 / 578

3-10
Issue 1.0 March 2001
365-575-389
Installation Manual
Equipment Installation
Equipment Bay Frame Installation
(Continued)
Uncrating and
Moving the
Equipment Bay
(Continued) Uncrating the Bay
Listed below are the steps used to uncrate the bay:
Moving the Bay - Supplementary Information
This section includes supplementary information for moving the bay to the
designated site.
!
CAUTION:
The weight of an uncrated WaveStar OLS 40G equipment bay may exceed
450 pounds. Verify that all lifting and transporting devices are rated to
accept the weight of the equipment bay. Two or more installers should be
used to move a WaveStar OLS 40G equipment bay.
Use the channel-type framework of the bay when lifting and moving the bay.
Threaded holes for 5/8-11 eye bolts are provided in the top of the bay frame for
the attachment of lifting devices.
(Continued on next page)
Step Action
1 Using a pinch-bar and claw type hammer in areas that have been nailed,
uncrate the bay in its shipping position. The bottom plate where the bay
rests may remain until the equipment bay is at its final position.
2 Remove the plastic bag and all foreign materials.
3 Remove the stile strips secured to the sides of the bay and set aside, if
equipped.
4 Remove any guard rail covers from the base of the bay and set aside.