Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 294 / 578

6-66
Issue 1.0 March 2001
365-575-389
Installation Manual
WaveStar OLS 40G Fiber and Circuit Pack Installation
Two OA/Two OA Dual Facing Shelf
Installation (Continued)
Fiber Jumper
Installation
(continued)
NOTE:
The fibers must pass in front of the bracket between the TLM and OMU/
ODU slots. The fibers should be dressed behind the shelf mounting
brackets.
Table 6-23. Intrashelf Fiber Jumpers for Two OA Dual Facing Shelf
(Continued on next page)
Application Line
Connect
Point Circuit Pack Connector
Label to
Install
End Terminal
Two OA Dual
Facing Shelf
Refer to
Figure 6-13 for
connection
point.
1 1 TLM 1A IN 1A-TLM-IN
1 1A OA TLM OUT 1A-OA-TLM-
OUT
2 TLM 1A OUT 1A-TLM-OUT
2 OA 1B TLM IN 1B-OA-TLM-
IN
5 ODU 1A IN 1-ODU-IN
5 OA 1A OUT 1A-OA-OUT
6 OMU 1B OUT 1-OMU-OUT
6 OA 1B IN 1B-OA-IN
2 3 TLM 2A IN 2A-TLM-IN
3 OA 2B TLM OUT 2B-OA-TLM-
OUT
4 TLM 2A OUT 2A-TLM-OUT
4 OA 2A TLM IN 2A-OA-TLM-
IN
7 OMU 2A OMU OUT 2-OMU-OUT
7 OA 2A IN 2A-OA-IN
8 ODU 2B IN 2-ODU-IN
8 OA 2B OUT 2B-OA-OUT