Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 387 / 578

Issue 1.0 March 2001
8-21
365-575-389
Installation Manual Network Element Startup and Provisioning
Initial Provisioning (Continued)
Additional
Provisioning Follow the steps in the table below to finish the provisioning of the NE:
Figure 8-6. Configuration.Edit.Date_and Time
(Continued on next page)
Step Action Reference
1 Enable far end communications: SECURITY>Enter>Far
End Communications. Click on RAR (Remote Alarm
Reporting) Enabled.
2 CONFIGURATION>Edit>Date_And_Time: Set the date
and time: where YY-MM-DD is the date in Year, Month,
and Day; HH-MM-SS is the time in Hours, Minutes, and
Seconds; TZ is the Time Zone: EST, CST, MST, or PST
in most of the U.S.; STRTDST is the start of daylight
savings time date; STOPDST is end of daylight savings
time date; and DSTZ, the Daylight Savings Time Zone,
is EDT, CDT, MDT, or PDT in most of the U.S. If daylight
savings time is not used, leave both the start and stop
dates with the same date.
Requirement: Output from the bay now displays the
correct date and time in the headings.
Figure 8-6