Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 310 / 578

6-82
Issue 1.0 March 2001
365-575-389
Installation Manual
WaveStar OLS 40G Fiber and Circuit Pack Installation
One OA/Two OA Dual Facing Shelf
Installation (Continued)
Circuit Pack Equip
Procedure For
2-Line Shelf
(Continued)
NOTE:
For 16 wavelength systems, remove the 0-dB LBO from the receive OA
OUT and replace it with a 7-dB LBO included with the OA LBO kit.
Step Action
3 Install, but do not seat, the following controller circuit packs in the shelf:
■
(1) LEA1 SYSCTL
■
(1) LEA2 SYSMEM
■
(1) LEA5 TOHCTL
4 Install, but do not seat, the following transmission circuit packs and units
for line 1 in the shelf:
■
(1) LEA105, LEA7, or LEA7B OA in slot 1A
■
(1) LDA1 TLM
■
(1) 506A or 506B OMU in slot 1B (Leave the retainer screws for
the unit on the shelf at this time.)
■
(1) 606B or 606D ODU in slot 1A (Leave the retainer screws for
the unit on the shelf at this time.)
5 Install, but do not seat, the following transmission circuit packs and units
for line 2 in the shelf:
■
(2) LEA7, LEA7B, LEA105 or LEA104 OA
■
(1) LDA1 TLM
■
(1) 506A or 506B OMU (Leave the retainer screws for the unit on
the shelf at this time.)
■
(1) 606A or 606C ODU (Leave the retainer screws for the unit on
the shelf at this time.)
6 Proceed to the Intrashelf Fiber Jumper Installation: page 6-83 section.