Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 207 / 578

Issue 1.0 March 2001
5-51
365-575-389
Installation Manual Wired Cable Installation
OLS/OT Integration Cables
Installation (Continued)
Rack and Stack
Configurations
(continued)
Step Action
15 Route the P5 end of the same ED-7G028-22 G803 cable through the left
side of the OT System Controller Shelf of Bay 2.
16 Attach P5 to the J5 IAO LAN connector on the OT System Controller
Shelf of Bay 2.
17 Remove the ED-7G045-20 G2 Termination from the OT System
Controller Shelf of Bay 2 and attach it to the J7 CTL OUT connector of the
OT Comp. 1 Shelf in Bay 2.
18 Route the P7 end of the ED-7G045-20 G6 cable through the left side of
the OT System Controller Shelf of Bay 2 and attach P7 to the J7 CTL
OUT connector.
19 Route the P6 end of the same cable through the left side of the OT
Complimentary 1 shelf in Bay 2 and attach P6 to the J6 CTL IN
connector.
20 Route the P9 end of the ED-7G045-20 G7 cable through the left side of
the OT System Controller Shelf of Bay 2 and attach P9 to the J9 EQPG
IN 1 connector.
21 Route the P8 end of the same cable through the left side of the OT
Complimentary 1 shelf in Bay 2 and attach P8 to the J8 EQPG OUT
connector.
22 Route the P13 end of ED-7G045-20 G9 cable through the left side of the
OT System Controller Shelf of Bay 2 and attach P13 to J13 RESET OUT
1 connector.
23 Route the P16 end of the same cable through the left side of the OT
Complimentary 1 shelf in Bay 2 and attach P16 to the J16 RESET IN
connector.
24 Tie excess cable into left or right bay frame channels.