
6-116
Issue 1.0
March 2001
365-575-389
Installation Manual
WaveStar OLS 40G Fiber and Circuit Pack Installation
Rack and Stack Configurations
(Continued)
Fiber Jumper
Installation
(continued)
Low Speed Fiber Connections: 2-Bay Configurations
The low speed fiber connections from the LGX panel in Bay 2 to/from the OTUs,
and from the OTUs to/from the OMU and ODU required the fiber jumpers listed in
the fiber kits in the subsection, Two-Bay Rack and Stack Fiber Kits: page 6-102.
These fiber jumpers are routed differently than described in the section, Optical
Translator Fiber Installation, so use the guidelines below for routing these jumpers
for each shelf.
■
Bay 1, OT System Controller Shelf (middle shelf): all fibers route out the left
side of the shelf
■
Bay 1, OT Complimentary Shelf 1 (top shelf): fibers for slots 9-16 route to
the left, fibers for slots 17-20 route to the right
■
Bay 2, OT System Controller Shelf (bottom shelf): all fibers route to the left
■
Bay 2, OT Complimentary Shelf 1 (upper shelf): all fibers, for slots 9-20
route to the left
NOTE:
Refer to Tables 1 and 2 in drawing NT00405-30 for further information on
low speed fiber jumper kits and routing schemes.
Low-Speed Fiber Connections: 3-Bay and 5-Bay Configurations
The low speed fiber connections from the LGX panel in Bay 2 to/from the OTUs,
and from the OTUs to/from the OMU and ODU required the fiber jumpers listed in
the fiber kits in the subsection, Three-Bay and Five-Bay Rack and Stack Fiber
Kits: page 6-106. These fiber jumpers are routed differently than described in the
section, Optical Translator Fiber Installation, so use the guidelines below for
routing these jumpers for each shelf.
■
Bay 1, OT System Controller Shelf (middle shelf): all fibers route out the left
side of the shelf
■
Bay 1, OT Complimentary Shelf 1 (top shelf): fibers for slots 9-16 route to
the left, fibers for slots 17-20 route to the right
■
Bay 2, OT System Controller Shelf (bottom shelf): all fibers route to the left
(Continued on next page)
Summary of Contents for WaveStar OLS 40G
