Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 474 / 578

11-2
Issue 1.0 March 2001
365-575-389
Installation Manual
Connecting SONET/SDH Systems to WaveStar OLS
40G
Background
Introduction This chapter covers fiber jumper installation and testing between SONET/SDH
Systems and the WaveStar Optical Line System (OLS) 40G at the OLS End
Terminal offices.
!
CAUTION:
Procedures in this installation manual are only to be performed by trained
personnel.
General
Considerations
!
WARNING:
Unterminated optical connectors may emit laser radiation and should not be
viewed with optical instruments other than indirect image-converting
devices. Also, avoid direct exposure to beam.
Keep the following information under consideration during cable installation:
■
Do not use cable ties with the optical fiber.
■
Place optical fiber jumpers in protective tube or channel, such as the
polyvinyl chloride (PVC) tubing provided in the installation kit
(C848065959) when running the cable from the WaveStar OLS 40G to the
cable rack.
■
Place optical fiber jumpers in the cable rack in a protective channel with
nothing on top of them.
■
Maintain a minimum of 1.5 inches of optical fiber bend radius.
■
Optical fiber jumpers require ST, FC/PC, LC, or SC type connectors for
connection to the WaveStar OLS 40G.
(Continued on next page)