Lucent Technologies WaveStar OLS 40G, Installation Manual

Page: 547 / 578

Issue 1.0 March 2001
E-5
365-575-389
Installation Manual
Harris C-1000 Centurion Installation —Extended
Miscellaneous Discretes
OT Connections to the Harris
Centurion EDMU (Continued)
Description
(continued)
The Harris unit is shipped equipped with adapters that connect with
D-Subminiature connector on the Harris unit and provide a 50-pin wire wrap
terminal on the other side of the adapter. This allows the Harris unit to be
connectorized for easy replacement without requiring any wiring.
Since the Harris unit has limited wire wrap connections to ground, some wire wrap
terminals will be required to handle two wire wraps per terminal. When wire
wrapping the first connections to pins 5 through 9 and 30 through 34, install the
first connection at the bottom of the pin to allow space for the second wire wrap.
When these terminals are filled, the wiring table will call out ground connections to
be used on J3 and J4 connectors which are located directly above connectors J1
and J2.
Table E-2. OT Miscellaneous Discrete Cable Wiring/OT to Harris EMDU
(Continued on next page)
OLS
ALM
No.
OTU ALRM
NAME
CABLE
CONN/
SHELF
HARRIS
ALARM
NO. (Pin Desg.)
WIRE
COLORS
OT
CABLE
PIN
Numbers
17 CP Fail OTU 1 P2/System 1 (J1-10 & J1-5-RTN) W-BL/BL-W 12 & 25(RTN)
18 C P Fail OTU 2 P2/System 2 (J1-35 & J!-5-RTN) W-O / O-W 11 & 24(RTN)
19 C P Fail OTU 3 P2/System 3 (J1-11 & J1-6-RTN) W-G / G-W 10 & 23(RTN)
20 C P Fail OTU 4 P2/System 4 (J1-36 & J1-6-RTN) W-BR / BR-W 9 & 22(RTN)
21 C P Fail OTU 5 P2/System 5 (J1-12 & J1-7-RTN) W-S / S-W 8 & 21(RTN)
22 C P Fail OTU 6 P2/System 6 (J1-37 & J1-7-RTN) R-BL / BL-R 7 & 20(RTN)
23 C P Fail OTU 7 P2/System 7 (J1-13 & J1-8-RTN) R-O / O-R 6 & 19(RTN)
24 C P Fail OTU 8 P2/System 8 (J1-38 & J1-8-RTN) R-G / G-R 5 & 18(RTN)
P2/ System No Connection 1, 2, 3, 4,
13, 14, 15,
16, 17
25 C P Fail OTU 9 P2/Compl S1 9 (J1-14 & J1-9-RTN) W-BL / BL-W 12 &
25(RTN)