Key
Description
Create
To create a line. Refer to "12 Creating Points and Lines".
Shifts
To apply horizontal and vertical shifts to the selected line.
Refer to "Define Shifts". Available for lines only. If using line
segments, shifts are applied in the
Define Segment
panel.
Page
To change to another page on this panel.
Fn
Settings
To configure the Measure to line/Stake to line app.
Fn
Report
To view an alignment report. Refer to "Save Line
Description of fields
Field
Option
Description
Line
Selectable list To select a line. Open the selectable list to
access the
Line Selection
panel showing all
selectable lines from the design job.
Type
Display only
The selected line type as straight, arc or
polyline.
Length
Display only
The horizontal grid distance between the
two points of the line.
Start chain-
age
Display only
The beginning chainage of the line.
Height
Selectable list Depending on the task chosen this parame-
ter determines the design height.
•
When measuring to a line, it affects the
height difference value.
•
When staking, it affects the delta height
value.
From line
Heights are computed along the line.
User
entered
Heights are typed in manually into the
Height
field.
Start point
of line
Heights are computed relative to the height
of the starting point of the line.
DTM
The height computed from the DTM at the
current position.
Next step
OK
accesses
Define Slope
,
Define Segment
,
Measure to Line
or
Define
Stake
.
Key
Description
Reverse
To reverse the direction of the lines, so that the distance
along line/chainage increment is in the opposite direction to
the original:
Original:
Reverse:
Define Line,
3D viewer page
Measure to line/Stake to line
577
