Next step
Page
changes to the
Height & offsets
page.
Key
Description
OK
To accept changes and to return to
Measure Hidden Point
.
Page
To change to another page on this panel.
Description of fields
Field
Option
Description
Compute
height for
hidden
points
Check box
When this box is checked, heights are com-
puted for hidden points.
Use dis-
tance offset
Check box
When this box is checked, a defined distance
offset is added to the measured distance.
Offset
Editable field
Available when
Use distance offset
is
checked. The distance offset is automatically
added to the measured distance.
Use angle
offset
Check box
When this box is checked, a defined angle
offset is added.
The offset is an angle between the North of
the device being used and WGS1984 geo-
detic North. The offset is applied when
measuring hidden points using a device
capable of measuring azimuths.
When this box is not checked, no angle off-
set is applied to the azimuth measurement
received from the hidden point measurement
device.
Type
Sets the default method for entering an
angle offset.
Permanent
Applies a default value for the offset angle.
The value is changeable.
New for
each point
Offset angle values must be entered for each
new hidden point.
Angle offset
Editable field
The default value for the offset angle.
Use height
offset
Check box
When this box is checked, a defined height
offset is added to the measured.
When this box is not checked, no height off-
sets are used. The result is the delta height
between the centre of the device and the
aimed point.
Type
Available when
Use height offset
is
checked.
Hidden Point Set-
tings,
Height & offsets page
Apps - The Toolbox
443
