Next step
Page
changes to the
Projection
page.
Description of fields
Field
Option
Description
Lower dis-
tance
Editable field
The minimum distance from the reference
surface which is projected.
Upper dis-
tance
Editable field
The maximum distance from the reference
surface which is projected.
Reverse the
projection
direction
Check box
When this box is checked, the direction of
the projection is in the opposite direction to
the original.
When creating the surface from an imported
DXF, the positive direction of the plane is
unknown. The positive direction of the plane
must be known to decide if the point is
inside or outside of the plane.
Use this option to find out the positive direc-
tion of the plane.
Next step
Page
changes to the
Triangulation
page.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Page
To change to another page on this panel.
Description of fields
Field
Option
Description
Create a
rough trian-
gulation
Check box
When this box is checked, the speed of the
calculation is increased when the surface
contains more than 1000 points. Points out-
side the limits defined for
Maximum dis-
tance to neighbouring groups of points
and
Minimum distance to surface
are
excluded from the triangulation.
Maximum
distance to
neighbour-
ing groups
of points
Editable field
When
Create a rough triangulation
is
checked, points beyond this defined distance
are excluded from the triangulation.
Minimum
distance to
surface
Editable field
When
Create a rough triangulation
is
checked, points closer to the surface are
excluded from the triangulation.
Settings,
Projection page
Settings,
Triangulation page
Inspect Surfaces
981
