Leica Captivate Technical Reference Manual Download Page 40

Page: 40 / 1060

Key

Description

To return to the

Leica Captivate - Home

menu.

Page

To change to another page on this panel.

Description of fields

Field

Description

Data format

Shows if raw data is saved and if so in which format.

Data stored on

Shows where the data is saved.

Current dynamics

Indicates if the instrument is static or moving.

Obs logged in cur-

rent interval

The number of observations logged in the current

interval.

Static observations

logged

The number of static epochs recorded in the current

job.

Kinematic observa-

tions logged

The number of moving epochs recorded in the cur-

rent job.

DBX points logged

The number of points stored to the database.

Next step
Page

changes to the

Point occupation

page.

Description of fields

Field

Description

Current dynamics

Shows if the instrument is moving or not.

GDOP

Current GDOP.

Logging rate

Rate at which raw observations are being recorded.

Number of moving

observations

The number of logged moving raw observations.

Reset as soon a new moving interval starts.

Logging data from

more than 5 sats

since

The time for how long five or more satellites are

tracked on L1 and L2 without interruption. If fewer

than five satellites were tracked, the counter is reset.

The counter is not reset after

Measure

Stop

Store

GNSS Data Logging

Status,

Logging information

page

GNSS Data Logging

Status,

Point occupation page

Icon Pop-up Bubbles

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands