•
For a "Standard" setup, the user must always measure all setup points
consecutively to complete the setup. This type of setup is always regarded
as a complete setup.
•
For "On-the-Fly" setups, the setup points can be measured together with
the survey points. It is not necessary to complete the setup before meas-
uring survey points. Until the user selects
Set
in
Setup Results
, this type
of setup is regarded as incomplete.
An incomplete setup, or a setup where more targets can be added, can
be accessed in the following ways:
1.
In the Measure app, Setup can be accessed by
selecting the
Setup
softkey.
2.
When entering any panel where measurements are possible, a mes-
sage is displayed to notify that the setup is incomplete. It is then
possible to:
a) continue with the existing app, or
OK
b) start Setup and create a setup, or
New
c) start Setup and continue to measure more fix-
points.
Setup
3.
Assigning the function
TS - Continue open setup
to the favourites
or a hot key.
Linked jobs will overwrite the points and lines from the global design job selec-
ted in
Design Data
.
50.2
Accessing Setup
Select
Leica Captivate - Home:
Setup
.
An illustration and a description is shown for each
Setup method
.
Key
Description
OK
To accept changes and access the subsequent panel. The
chosen settings become active.
Fn
Settings
To configure the Setup app. Refer to "50.3 Configuring
50.3
Configuring Setup
Press
Fn
Settings
in
Total Station Setup
.
Incomplete setups
Linked jobs and global
data
Access
Total Station Setup
Access
Setup - TS
871
