Leica Captivate, Technical Reference Manual

Page: 502 / 1060

Description of fields
Field Option Description
Point ID Editable field The identifier for the COGO point depending
on the point ID template configured for GS
points / TS points in ID Templates .
Height or
Local ellip-
soid height
Editable field The height of the start point of the line is
suggested. A height value to be stored with
the calculated point can be typed in.
Offset point Display only Point ID of offset point. Available for Create
line using : Calculate line base point .
Distance
along line ,
Distance
along line
(ground) or
Distance
along line
(ellipsoid)
Display only Horizontal distance from start point to base
point. Available for Create line using : Cal-
culate line base point .
Offset , Off-
set (ground)
or
Offset
(ellipsoid)
Display only Offset from base point to offset point. Posi-
tive to the right and negative to the left of
the line. Available for Create line using :
Calculate line base point .
Line length Display only Length of line from start point to end point.
Line bearing Display only Bearing of line from start point to end point.
Bearing to
offset point
Display only Bearing of offset point from base point to
offset point.
Next step
On the Code page, type in a code if desired.
On the 3D viewer page, the line and the new point is shown.
Store stores the result.
38.7.4 Segment an Arc
The arc segmentation and the functionality of all panels and fields are similar
to those for line segmentation. Refer to "38.7.5 Segment a Line"
New field and option in Define Arc Segmentation
Field Option Description
Method Delta angle To divide the arc by an angular value.
Delta angle Editable field The angular value by which new points are
defined on the arc.
Exceptions to line cal-
culation segmenta-
tion
502 COGO