Field
Option
Description
Point ID of
last stored
point
Display only
ID of the last measured point of the chosen
surface.
Date stored
Display only
Date of the last measured point of the
chosen surface.
Time stored
Display only
Time of the last measured point of the
chosen surface.
Surface sta-
tus
Triangula-
tion done
The surface has been triangulated and not
been modified since the last triangulation.
Triangula-
tion needed
The surface has been modified since the last
triangulation or no triangulation exists.
Next step
Page
changes to the
Points
page.
Key
Description
OK
To accept all settings and continue with the next panel.
Add all
To add one point from the job to the surface.
Clear one
To remove one point from the surface.
Boundry
To use this point for the boundary.
Page
To change to another page on this panel.
Fn
Settings
To configure the Volume Calculations app. Refer to "59.3
Configuring Volumes & Surfaces".
Fn
Add all
To add all points from the job to the surface.
Fn
Clear all
To remove all points from the surface.
Next step
OK
continues to
Surface Task Selection
.
59.4.4
Choosing an Existing Surface
Select
Choose an existing surface
in
Volume Calculations
.
Edit Surface,
Edit Surface page
Access
Volumes & Surfaces
971
