Next step
Page
changes to the
Info
page.
Two things can be configured on this page:
1
.
The required information for the stake or measure method to be displayed
on the page.
2
.
If and which user-defined page is displayed.
Key
Description
OK
To confirm the changes and continue.
Clear
To clear all parameters from all lines.
Fn
About
To display information about the app name, the version num-
ber, the date of the version, the copyright and the article
number.
Fn
Default
To set the default value for all lines.
Description of fields
Field
Option
Description
Show user
defined
page
Check box
Shows a selectable list for the pages.
Page to
show
Selectable list The user-defined page to be shown.
Method
Display only
The method is based on the selected Meas-
ure to line/Stake to line task. The settings in
the following lines can only be changed for
the current task.
The method defines the parameters available
to view on the page of the app. Different
combinations of the parameters to view can
be stored.
1st line
to
16th line
Selectable list Define which parameters are viewed on each
line. Up to 16 lines of parameters can be
defined.
☞
Some of the options are explained
in graphics in the following chap-
ters.
Always available
Point ID
To enter the point ID.
Antenna
height
For GS:
To enter the antenna height.
Target
height
For TS:
To enter the target height.
Code
Editable field for codes.
Attribute 01
and
Attrib-
ute 02
Editable field for attributes for codes.
Settings,
Info page
572
Measure to line/Stake to line
