Leica Captivate Technical Reference Manual Download Page 353

Page: 353 / 1060

Field

Option

Description

Import

image

Selectable list To select the geo-referenced map back-

ground image to be transferred.

☞

When selecting a world file image,

the *.jpg and *.jgw files must have

the same file names.

☞

The converted image file has the

same name as the original .jpg file.

Transfer all

objects of

the selected

type

Check box

Available for some transfer object options. To

transfer all objects.

Transfer all

objects into

a single

AllOb-

jects.zip file

Check box

Available for

Object to transfer: All

objects

. To zip all objects automatically dur-

ing transfer.

☞

User-defined templates for the

sketch pad are included.

☞

*.jpg and *.jgw files from the

\Data and from the \Data

\Map_Images folder are excluded.

*.archive files from the \Data

\Map_Images folder are transfer-

red.

☞

When

Do not transfer jobs

checked, jobs will be excluded from

the zip file.

Transfer

scans

Transfer

images

Transfer

surfaces

Transfer

CAD files

and

Transfer

XML files

Check box

Available on CS when connected to TS. Avail-

able for

Object to transfer: Job

Select the objects to transfer between CS

and TS. Reduce the selection to shorten the

transfer time.

Do not

transfer

jobs

Check box

Available for

Object to transfer: All

objects

. To exclude jobs from the transfer.

Transfer

linked jobs

Check box

Available for

Object to transfer: Job

with

Transfer all objects of the selected type

not checked. To transfer the selected job

including the linked jobs. The transfer is pos-

sible between memory devices on one instru-

ment. The link between the job and the

linked jobs is updated with the path of the

new memory device.

Settings - Tools

353

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands