Leica Captivate Technical Reference Manual Download Page 211

Page: 211 / 1060

Field

Option

Description

Name

and

Bluetooth

Display only

The last connected total station using Blue-

tooth or CTR20 expansion pack.

If no information of a last total station is

available, then

----

is displayed.

18.14

GSI output

Each time a measured point is stored to the job, GSI data is streamed through

the configured port of the field controller.

Connection Settings

highlight

GSI output

Edit

☞

Unavailable for CS35. Use Windows to configure a connection.

Key

Description

To accept changes and return to the panel from where this

panel was accessed.

Search

Available when

CS Bluetooth 1

CS Bluetooth 2

are

selected. To search for all available Bluetooth devices. If more

than one Bluetooth device is found a list of available devices

is provided.

Device

To create, select, edit or delete a device.

Description of fields

Field

Option

Description

Output GSI

data to

device

Check box

Activates the connection.

Connect

using

CS RS232 port

The RS232 port on the field controller.

CS Bluetooth 1

and

CS Bluetooth 2

The Bluetooth ports on the field controller

which are used.

TS Bluetooth 1

and

TS Bluetooth 2

The Bluetooth ports on the TS16 which

can be used.

Cable

The RS232 port on the TS16.

Description

Access

GSI Output Connec-

tion

Connections - All other connections

211

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands