Field
Option
Description
Offset
Editable field
The horizontal offset of the hinge point from
the centreline/reference line.
Height off-
set type
The vertical offset type for the hinge point.
Absolute
The only option available for 2D lines.
Relative to
line
or
Hold hinge
Available for 3D lines.
Relative to
surface
grade
Available for
Stake
:
Manual slope
. The
manual slope is defined by:
•
Hinge offset relative to the selected
hinge reference line
•
Hinge height, calculated by using the
hinge offset on the selected surface
grade (left or right selected surface
grade, depending on
Offset
– or +)
b
a
c
d
Road_105
a
Hinge point of manual slope
b
Defined hinge offset (-)
c
Left surface grade of design
d
Selected hinge reference
Height
Editable field
The elevation of the hinge point (absolute
height). Available for
Height offset
type
:
Absolute
.
Slope loca-
tion
Selectable list Differentiates if the defined slope is a cut/fill
and left/right.
a
b
c
d
e
Road_079
a Hinge point
b Left cut
c Right cut
d Left fill
e Right fill
Roads - Road
779
