Leica Captivate Technical Reference Manual Download Page 177

Page: 177 / 1060

Description of fields

Field

Option

Description

Sensor

Selectable list Select the attached model.

Connect

using

Cable

Bluetooth

How the instrument is connected. The

options available depend on the selection for

Sensor

. The availability of the other fields

depends on the selection made here.

☞

For CS35: Only Bluetooth connec-

tions can be used. Use Windows to

configure the Bluetooth connec-

tion.

Last used

rover

Display only

Available for RTK rover.

The name of the selected Bluetooth device.

Last used

base

Display only

Available for RTK base.

The name of the selected Bluetooth device.

Bluetooth

Display only

The ID of the selected Bluetooth device.

18.4

ASCII input

18.4.1

Configuration of an ASCII Input Connection

The ASCII Input connection receives ASCII messages from third-party devices

such as depth sounders, barometers, digital cameras, pipe detectors, Geiger

counters. The ASCII messages are stored as annotations together with the next

manually measured point and/or auto point.

The settings on this panel define the port and the device to be used and the

type of ASCII messages to be written to individual annotations.

For RTK rover:

•

Connection Settings

CS connections

page, highlight

ASCII input

Edit

For CS35:

•

Unavailable. Use Windows to configure a connection.

Key

Description

To accept changes and return to the panel from where this

panel was accessed.

Description

Access

ASCII Input,

ASCII input page

Connections - All other connections

177

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands