Key
Description
Measure
For GS:
To start measuring the point. The key changes to
Stop
. The
difference between the current position and the adjusted
plane is displayed.
Stop
For GS:
To end measuring the point. The key changes to
Store
. After
ending the measurement, the differences between the
measured point and the adjusted plane are displayed.
Measure
For TS:
To measure a distance and store distance and angles.
Distance
For TS:
To measure a distance.
Store
To store the point information.
Compare
To calculate offsets to previously measured points.
Done
To finish measuring points.
Fn
Tools
Refer to "37 Apps - The Toolbox".
Description of fields
Field
Option
Description
Point ID
Editable field
The number of the measured point.
Target
height
Editable field
For TS:
The target height.
Antenna
height
Editable field
For GS:
The height of the antenna.
Perpendicu-
lar offset
distance
Display only
The perpendicular distance between the
measured point and the adjusted plane.
Offset
height
Display only
The vertical distance between the measured
point and the adjusted plane.
X coordi-
nate
,
Y
coordinate
,
Z coordinate
Display only
Available when
Use local plane coordinate
system
is checked in
Edit Plane
,
Origin
.
Measure Points to
Plane,
page
Reference Plane & Grid Scan
611
