Field
Option
Description
Automati-
cally link
captured
image to
measured
point
Check box
Available when
Capture image from over-
view camera for every measured point
or
Capture image from telescope camera
for every measured point
is checked.
When this box is checked, the image taken
with a measurement is automatically linked
to the last measurement taken.
☞
Several images can be linked with
one point. One image can be
linked to several measured points.
When this box is not checked, the image
taken with a measurement is not automati-
cally linked to a measurement. The image can
be linked manually in data management.
Store cross-
hairs on all
captured
images
Check box
When this box is checked, the crosshair is
stored on the picture.
Store data
shown in
camera view
when press-
ing 'Cap-
ture'
Check box
When this box is checked, point and line
information is stored on images taken with
Capture
. The information stored on the
image depends on the distance slider and
the settings defined in
Object Display
and
Sort & Filter
.
Store sec-
ond image
without
overlay data
Check box
When this box is checked, the image without
points and lines is saved additionally.
32.3
Taking an Image
32.3.1
Overview
•
The camera can be used to take images of survey relevant objects.
•
The images can be linked to points and lines stored in the job.
•
Screenshots can be taken from the display as additional information in
support cases.
Functionality is provided by icons in a groupbar. Some of the functions per-
formed by the icons can also be replicated using a key on the keyboard.
•
A TS16 I/MS60/TS60 I must be used.
•
The camera settings must be active. Refer to "32.2 Camera Settings".
•
The documentation settings must be set. Refer to "32.2 Camera Settings".
Description
Requirements
Camera & Imaging
377
