Leica Captivate, Technical Reference Manual

Page: 733 / 1060

Key Description
OK To accept the panel entries and continue.
Inverse Available when Horizontal distance , Horizontal offset to
centreline or Slope distance is highlighted. To calculate the
distance and angle between two points from the job.
Last inv Available when Horizontal distance , Horizontal offset to
centreline or Slope distance is highlighted. To select values
from the last inverse calculations.
% /
V:H /
H:V
To switch between h:v , v:h and %(v/h x 100) for the slope
ratio.
Page To change to another page on this panel.
Fn Settings To configure the app. Refer to "44.3 Configuring Alignment
Editor".
Fn Reset To reset all panel entries.
Description of fields
Field Option Description
Template
name
Display only Name of the cross section template to be
edited.
Layer name Display only Name of the layer to be edited.
Method Method to be used for defining the segment.
Horizontal
distance &
slope
Using a horizontal distance and slope ratio to
define the segment.
Horiz & ver-
tical dis-
tance
Using a horizontal distance and a vertical dis-
tance to define the segment.
CL offsets Using a horizontal and vertical offset in rela-
tion to the centreline.
Slope dis-
tance &
ratio
Using a slope distance and slope ratio to
define the segment.
Horiz dis-
tance &
height
Using a horizontal and absolute height to
define the segment. Only available for tem-
plates with Allow absolute heights for
cross section definition enabled.
Add Segment,
Input page
Roads - Alignment Editor 733