Leica Captivate Technical Reference Manual Download Page 341

Page: 341 / 1060

Description of fields

Field

Option

Description

For mes-

sages, play

Sounds only

A sound alert is given when an information

message appears.

Sounds &

voice

A sound and voice alert is given when an

information message appears.

Beep when

total sta-

tion turns

past 0, 90,

180 or 270°

Check box

If checked, the horizontal sector beep is

turned on. The instrument beeps when

within 5 gon/4°30’ of the defined sector, has

a long and consistent beep within

0.5 gon/27’ and no beep within 0.005 gon/

16’’.

Hz sector

angle

Editable field

Editable field for the sector angle for which a

beep sounds.

Next step
Page

changes to the

Text input

page.

Description of fields

Field

Option

Description

Data input

method

None

Function

keys

Mobile

phone style

Pop-up key-

board

Alphanumeric input can either be through

function, numeric keys or through a pop-up

keyboard to be used with the stylus.

Default

characters

Selectable list Sets the set of extra characters available

through

Data input method

Function

keys

whenever an entry is made.

The choices available depend on the charac-

ter sets loaded on the instrument and the

language configured to be used.

28.3

Regional

The settings on this panel define

•

the units for all types of measurement data displayed.

•

information related to some types of measurement data.

•

the order in which coordinates are displayed.

•

the instrument identification number.

•

the languages available on the instrument.

Select

Leica Captivate - Home: Settings

System

Regional

Screen, Audio & Text

Input,

Audio page

Screen, Audio & Text

Input,

Text input page

Description

Access

Settings - System

341

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands