Field
Option
Description
The design height, which is the orthometric
height of the point to be staked, is dis-
played. If the orthometric height cannot be
displayed, the local ellipsoidal height is dis-
played. If it is not possible to display the
local ellipsoidal height, the WGS 1984 height
is displayed. The value for
Height offset
configured in
Settings
,
Heights
page is not
taken into account.
Changing the value for
Design height
changes the values displayed for cut and fill.
-
-
The orthometric height of the current posi-
tion is displayed with the stake height differ-
ence in the stakeout graphics. If the ortho-
metric height cannot be displayed, the local
ellipsoidal height is displayed. If it is not pos-
sible to display the local ellipsoidal height,
the WGS 1984 height is displayed. The value
for
Height offset
configured in
Settings
,
Heights
page is taken into account.
If
View results page after staking a point
is checked in
Settings
,
General
page, this panel opens automatically once a point is measured and stored.
Key
Description
OK
To return to the stake panel.
Page
To change to another page on this panel.
Description of fields
Field
Option
Description
Design
point ID
Display only
The point ID of the design point.
Store
staked
point as
Editable field
The point ID of the point staked.
Design
height
Display only
The entered design elevation.
Measured
height
Display only
The height measured at the stored point.
Cut
/
Fill
Display only
The height difference between the
Design
height
and the
Measured height
.
2D distance
Display only
Displays the horizontal difference from the
staked point to the point to be staked.
3D distance
Display only
Displays the spatial difference from the
staked point to the point to be staked.
Stake Results,
General page
Stakeout
905
