Leica Captivate, Technical Reference Manual

Page: 152 / 1060

Field Option Description
☞
The line length is shown in the
unit configured in Regional , Dis-
tance page.
Key Description
OK To store the line/points to the design job.
Page To change to another page on this panel.
Description of fields
Field Option Description
Line ID Selectable list To select a line. Open the selectable list to
access the Line Selection panel showing all
selectable lines from the design job.
Objects to
create
Line To create lines only.
Points To create points only.
Line &
points
To create lines and points.
Single point To create only one point.
Offset Editable field Perpendicular offset of the line. Left is nega-
tive. Right is positive.
Line ID Editable field The name of the new line. The configured ID
template for lines is used. Type over the line
ID to change it.
Starting
point ID
Editable field The point ID of the line start point. The con-
figured ID template for points is used.
Start chain-
age
Display only The beginning chainage of the line.
Chainage Editable field Chainage of the current position along the
line.
Point ID Editable field The name of the new point. The configured
point ID template is used. The ID can be
changed in the following ways:
•
To start a new sequence of point IDs,
type over the point ID.
•
For an individual name independent of
the ID template Fn Tools and then Indi-
vidual point ID . Fn Tools and then
Sequential point ID changes back to
the next ID from the configured ID tem-
plate.
1. In Choose line to extend select the line to extend.
2. OK .
Create Offset Line &
Points
Extend existing poly-
line
152 Creating Points and Lines