Leica Captivate Technical Reference Manual Download Page 335

Page: 335 / 1060

Key

Description

Store

To store the free code and any associated attribute values

and to return to the panel from where this panel was

accessed.

New

To create a code.

Attributes

To type in attribute values and/or add new attributes for the

selected free code. Refer to "27.3.2 Point Coding without

Dynamic List".

Last

Available if a free code has been previously used in the job.

To select from a list of last used free codes. The free codes

are sorted by time with the most recently used code at the

top of the list.

Group

To view, create, delete, activate and deactivate code groups.

Refer to "8.5 Managing Code Groups".

Sort

To sort codes by code name, code description, quick code or

the last used.

27.4.2

Free Coding with Direct Input

A hot key is configured to access the panel

Free Code & Attributes

or the

favourites menu is configured to display the option

Data - Enter free code

Press a hot key configured to access the panel

Free Code & Attributes

. Refer

to "26.4 Hot keys & favourites" for information on hot keys.

Type in a code and attribute values. As soon as a free code is typed in, a

codelist is created within the job. Up to eight attributes can be added. Refer to

"27.4.1 Free Coding Using a Codelist" for a description of keys.

Next step

Press

Store

27.5

Code and Attribute Mismatch

27.5.1

Code Mismatch

When storing a point with a code, it can happen that a point with the same

point ID exists in the job. If the codes of the new and the existing point do not

Requirements

Access

Free Code & Attrib-

utes

Description

Coding

335

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands