a
b
b
b
c
008160_002
a
b
b
b
c
008161_002
a
b
b
b
c
008162_002
a
b
c
008163_002
a
Begin line
b
Continue
line
c
End line
a
Begin
spline
b
Continue
line
c
End spline
a
Begin line
b
Continue
line
c
Close line
a
Begin best
fit arc
b
Continue
line
c
End best
fit arc
27.3
Coding functionality: Only code pts (no linework)
27.3.1
Point Coding with Dynamic List
•
Coding functionality
:
Only code pts (no linework)
is selected in
Cod-
ing
.
•
Allow new codes to be created
is checked in
Coding
.
•
The user-defined page with a field for codes must be configured.
1.
Click in the field
Code
or
Code (auto)
in a user-defined page in an
app.
2.
Type in a point code or select a code from the list.
3.
Type in attribute if defined.
4.
Press
Measure
.
27.3.2
Point Coding without Dynamic List
•
Coding functionality
:
Only code pts (no linework)
is selected in
Cod-
ing
.
•
Allow new codes to be created
is not checked in
Coding
.
•
The user-defined page with a field for codes must be configured.
Requirements
Coding
Requirements
Coding
331
